Maintenance details

Maintenance details

In order to better protect your rights and interests, please pay attention to the following matters：

Since it takes a period of time for the pressure sensitive adhesive layer to be fully bonded, the vehicle cleaning should be carried out after the film is completely dry (about a week). During the car washing, try not to wash the edge of the film directly with a high-pressure water gun;

When decorating the wedding car, it is forbidden to use a strong sucker to absorb the surface of the film. If there is a phenomenon of firecrackers and fireworks dyeing, it must be cleaned and maintained within 12 hours to prevent penetration dyeing;

After the construction, there are bubbles and blisters on the membrane surface, which is a normal phenomenon. Generally, they will disappear naturally in 10-20 days (it is recommended to shine more sunlight so that the moisture can disappear as soon as possible);

If the film surface is dirty, you can use decontamination wax to make it by hand, but don't use polishing machine;

In order to keep the film surface as bright as new for a long time, it can cooperate with waxing maintenance. It is recommended that the maintenance period is once every 3 months;